F065
Diametrul nominal al țevii exterioare:
- Recomandat de Standardul Enterprise pentru Echipamente Criogenice HL. De asemenea, poate fi produs conform cerințelor clientului.
- Presiune de proiectare:
- Recomandat ≤ 16 bar. Sau selectați tipul de conexiune sudată (≤40 bar).
- Materialul țevii exterioare
Fără cerințe speciale, materialul țevii interioare și al țevii exterioare va fi selectat la fel.
3.1.3 Tipul de conexiune sudată
model
Conexiune
Tip
Diametrul nominal al țevii interioare
Presiune de proiectare
Material
din țeava interioară
Standard
Remarcă
W010
00X
Tip de conexiune sudată pentru furtun flexibil izolat în vid static
DN10, 3/8"
8~40 bari
Oțel inoxidabil seria 300
ASME B31.3
| V | DN20, 3/4" | DN25, 1" | Diametrul nominal al țevii exterioare: | |
| Presiune de proiectare | Materialul țevii interioare. | A este 304, | DN40, 1-1/2" | C este 316, |
| D este 316L, | HLHS | HLHS | W015 | 00X |
| DN15, 1/2" | No | No | HLHS | Presiune de proiectare |
| Nominal Diameter of Inner Pipe | 00X | HLHS | W025 | 00X |
| Design Pressure | HLHS | DN32, 1-1/4" | 00X | DN32, 1-1/4" |
| HLHS | HLHS | HLHS | DN40, 1-1/2" | HLHS |
| Recomandat ≤ DN25 sau 1". Sau selectează tipul de conexiune baionetă în vid cu flanșe și șuruburi (de la DN10, 3/8" la DN80, 3"), tipul de conexiune sudată (de la DN10, 3/8" la DN150, 6") | 00X | |||
| DN50, 2" | HLHS | |||
| Material | 300 Series Stainless Steel | |||
| Standard | LN2HLHS2W080 | |||
00X
DN80, 3"
| LHSW100 | |
| 00X | |
| DN100, 4" |  |
LHSW125
| 00X | DN125, 5" | LHSW150 | 00X | DN150, 6" | Diametrul nominal al țevii exterioare: |
| Recomandat de Standardul Enterprise pentru Echipamente Criogenice HL. De asemenea, poate fi produs conform cerințelor clientului. | Materialul țevii exterioare | DN25, 1" | DN25, 1" | DN25, 1" | DN25, 1" |
| Tip | DN25, 1" | DN25, 1" | DN25, 1" | DN25, 1" | |
| Standard | DN25, 1" | DN25, 1" | DN25, 1" | DN25, 1" | |
| DN10, 3/8" | DN25, 1" | DN25, 1" | DN25, 1" | DN25, 1" | |
| Presiune de proiectare. | / | DN25, 1" | DN25, 1" | / | |
| Materialul țevii interioare. | / | DN25, 1" | DN25, 1" | / | |
| C este 316, | / | DN25, 1" | DN25, 1" | / | |
| HLHS | / | DN25, 1" | DN25, 1" | / | |
| DN15, 1/2" | / | DN25, 1" | DN25, 1" | / | |
| 00X | / | / | DN25, 1" | / | |
| HLHS | / | / | DN25, 1" | / | |
| 00X | / | / | DN25, 1" | / |
Diametrul nominal al țevii interioare:
| Recomandat ≤ DN25 sau 1". Sau selectează tipul de conexiune baionetă în vid cu flanșe și șuruburi (de la DN10, 3/8" la DN80, 3"), tipul de conexiune sudată (de la DN10, 3/8" la DN150, 6") | Diametrul nominal al țevii exterioare: |
| Recomandat de Standardul Enterprise pentru Echipamente Criogenice HL. De asemenea, poate fi produs conform cerințelor clientului. | Presiune de proiectare: |
| Recomandat ≤ 16 bar. Sau selectează tipul de conexiune sudată (≤40 bar) | Materialul țevii exterioareFără cerințe speciale, materialul țevii interioare și al țevii exterioare va fi selectat la fel.3.2 Sistem dinamic de conducte izolate în vid3/S |
| 3.2.1 Tip de conexiune tip baionetă cu vid și cleme | model |
| Conexiune | Tip |
| Diametrul nominal al țevii interioare | Presiune de proiectare |
| Material | din țeava interioară |
| Standard | Remarcă |
HDB01008
Tip conexiune baionetă cu cleme pentru furtun flexibil izolat dinamic în vid
lDN10, 3/8"
l8 bari
| Oțel inoxidabil seria 300 C este 316, | Materialul țevii interioare. | |
| A este 304, | B este 304L,C este 316,D este 316L, | |
| E este altul. | HLH | DB01508 |
| DN15, 1/2" | Presiune de proiectare: | Presiune de proiectare: |
| DN20, 3/4" | Presiune de proiectare: | Presiune de proiectare: |
| DN25, 1" | Presiune de proiectare: | Presiune de proiectare: |
| Diametrul nominal al țevii exterioare: | Presiune de proiectare: | Presiune de proiectare: |
Recomandat ≤ 8 bar. Sau selectează tipul de conexiune baionetă în vid cu flanșe și șuruburi (≤16 bar), tipul de conexiune sudată (≤40 bar)Materialul țevii exterioareFără cerințe speciale, materialul țevii interioare și al țevii exterioare va fi selectat la fel.
Stare de alimentare:
HL-HX-X-Locația trebuie să alimenteze pompele de vid cu energie electrică și să informeze HL Cryogenic Equipment cu privire la informațiile locale privind electricitatea (tensiune și herți).-00-X
3.2.2 Tip de conexiune tip baionetă cu vid, cu flanșe și șuruburi
model
Conexiune
Tip
Diametrul nominal al țevii interioare
Presiune de proiectare
Material
din țeava interioară
Standard
Remarcă
Nominal Diameter of Inner Pipe
00X
8~16 bari
DN10, 3/8"
8~16 bari
Oțel inoxidabil seria 300
Design Pressure
Presiune de proiectare.
08 este 8 bar,
16 este 16 bari.
Materialul țevii interioare.
A este 304,
B este 304L,
C este 316,
D este 316L,
E este altul.
F015
00X
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHSF040X | Seria de separatoare de fază izolate în vid | DN10, 3/8" | armean
| 300 Series Stainless Steel | ASME B31.3 | X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| francezăDiametrul nominal al țevii exterioare:X | DN15, 1/2" | |||||
| francezăRecomandat ≤ 16 bar. Sau selectați tipul de conexiune sudată (≤40 bar).X | DN20, 3/4" | |||||
| francezăStare de alimentare:X | DN25, 1" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN25 or 1". Or selects the Vacuum Bayonet Connection Type with Flanges and Bolts (from DN10, 3/8" to DN80, 3"), Welded Connection Type (from DN10, 3/8" to DN150, 6")
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: islandez
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| franceză08 este 8 bar,00X | și 25, 32, 40. | DN10, 3/8" | 8~16 bar | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure. 08 is 8bar, 16 is 16bar.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| francezăSamoană00X | DN15, 1/2" | |||||
| francezăSindhi00X | DN20, 3/4" | |||||
| francezăTadjik00X | DN25, 1" | |||||
| francezăThailandeză00X | DN32, 1-1/4" | |||||
| francezăuzbec00X | DN40, 1-1/2" | |||||
| francezăXhosa00X | DN50, 2" | |||||
| francezăZulu00X | DN65, 2-1/2" | |||||
| francezăOriya00X | DN80, 3" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN80 or 3". Or selects the Welded Connection Type (from DN10, 3/8" to DN150, 6"), Vacuum Bayonet Connection Type with Clamps (from DN10, 3/8" to DN25, 1").
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Stare de alimentare:
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHS00X00X | DN10, 3/8" | DN10, 3/8" | Oțel inoxidabil seria 300 | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure 08 is 8bar, 16 is 16bar, and 25, 32, 40.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| francezăDN15, 1/2"00X | DN15, 1/2" | |||||
| francezăDN20, 3/4"00X | DN20, 3/4" | |||||
| francezăDN25, 1"00X | DN25, 1" | |||||
| francezăW03200X | DN32, 1-1/4" | |||||
| francezăW04000X | DN40, 1-1/2" | |||||
| francezăW05000X | DN50, 2" | |||||
| francezăW06500X | DN65, 2-1/2" | |||||
| francezăW08000X | DN80, 3" | |||||
| HFurtun de manta de vid00X | DN100, 4" | |||||
| HSupapă de reglare a debitului de oxigen lichid din China00X | DN125, 5" | |||||
| HPreț en-gros China China Rezervor standard ISO 2...00X | DN150, 6" |
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHSSistem dinamic de pompă de vid00X | Seria de separatoare de fază izolate în vid | DN10, 3/8" | 8~16 bar | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure. 08 is 8bar, 16 is 16bar.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| francezăWhatsApp00X | DN15, 1/2" | |||||
| francezăWeChat00X | DN20, 3/4" | |||||
| francezăgerman00X | DN25, 1" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN25 or 1". Or selects the Vacuum Bayonet Connection Type with Flanges and Bolts (from DN10, 3/8" to DN80, 3"), Welded Connection Type (from DN10, 3/8" to DN150, 6")
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Greacă
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
danez
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLLaoX | Vacuum Bayonet Connection Type with Clamps for Dynamic Vacuum Insulated Flexible Hose | DN10, 3/8" | armean
| 300 Series Stainless Steel | ASME B31.3 | X:Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLHEstoniaX | DN15, 1/2" | |||||
| HLHFrizonăX | DN20, 3/4" | |||||
| HLHGujaratiX | DN25, 1" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN25 or 1". Or selects the Vacuum Bayonet Connection Type with Flanges and Bolts (from DN10, 3/8" to DN80, 3"), Welded Connection Type (from DN10, 3/8" to DN150, 6")
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: islandez
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz).
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLMalayalam00X | Maori | DN10, 3/8" | 8~16 bar | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure. 08 is 8bar, 16 is 16bar.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLHDSamoană00X | DN15, 1/2" | |||||
| HLHDSindhi00X | DN20, 3/4" | |||||
| HLHDTadjik00X | DN25, 1" | |||||
| HLHDThailandeză00X | DN32, 1-1/4" | |||||
| HLHDuzbec00X | DN40, 1-1/2" | |||||
| HLHDXhosa00X | DN50, 2" | |||||
| HLHDZulu00X | DN65, 2-1/2" | |||||
| HLHDOriya00X | DN80, 3" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN80 or 3". Or selects the Welded Connection Type (from DN10, 3/8" to DN150, 6"), Vacuum Bayonet Connection Type with Clamps (from DN10, 3/8" to DN25, 1").
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Recommended ≤ 16 bar. Or selects Welded Connection Type (≤40 bar).
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz).
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHDW01000X | Welded Connection Type for Dynamic Vacuum Insulated Flexible Hose | DN10, 3/8" | 8~40 bar | Stainless Steel 304, 304L, 316, 316L | ASME B31.3 | 00: Design Pressure 08 is 8bar, 16 is 16bar, and 25, 32, 40. .
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLHDW01500X | DN15, 1/2" | |||||
| HLHDW02000X | DN20, 3/4" | |||||
| HLHDW02500X | DN25, 1" | |||||
| HLHDW03200X | DN32, 1-1/4" | |||||
| HLHDW04000X | DN40, 1-1/2" | |||||
| HLHDW05000X | DN50, 2" | |||||
| HLHDW06500X | DN65, 2-1/2" | |||||
| HLHDW08000X | DN80, 3" | |||||
| HLHDW10000X | DN100, 4" | |||||
| HLHDW12500X | DN125, 5" | |||||
| HLHDW15000X | DN150, 6" |
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz).
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHDT01000X | Vacuum Bayonet Connection Type with Clamps for Dynamic Vacuum Insulated Flexible Hose | DN10, 3/8" | 8~16 bar | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure. 08 is 8bar, 16 is 16bar.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLHDB01500X | DN15, 1/2" | |||||
| HLHDB02000X | DN20, 3/4" | |||||
| HLHDB02500X | DN25, 1" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN25 or 1". Or selects the Vacuum Bayonet Connection Type with Flanges and Bolts (from DN10, 3/8" to DN80, 3"), Welded Connection Type (from DN10, 3/8" to DN150, 6")
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Recommended ≤ 16 bar. Or selects the, Welded Connection Type (≤40 bar)
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz).
